WinCE-based embedded system for control of an industrial screw machine

Nowadays, industrial systems frequently require the control of some industrial process and monitoring of relevant data about the process, using a friendly visual environment. Normally, is used a PLC (Programmable Logical Controller) to control the process and assure that the timing requirements (deadlines) are satisfied and a PC to monitor the data. However, the implementation of such solution presents the following drawbacks to the system programmer: (1) he or she needs to know the communication protocol between the two platforms - PLC and the PC; (2) he or she needs to learn two different programming languages - the low level PLC language and a high level PC language. On the other hand, in some cases, the reserved space to control the systems is reduced, making the implementation of such solution very hard. This paper presents an approach based on an embedded PC with real-time processing capability and data monitoring facility. The proposed system runs the Windows CE operating system and allows all software development in C/C++, using the Microsoft Visual Studio environment. The system was tested on an industrial screw machine for PCBs

Miniature thermoelectric power plant

This paper describes a miniature thermoelectric power plant made with the boiler and the water pump from an old starch iron. It also uses a computer cooling fan, which serves as electric power generator. The boiler vaporizes the water it receives from the water pump. Then, the steam is injected over the turbine of the fan making it twirl. The voltage generated by the fan is enough to lighten a couple of LEDs. A wooden case with a chimney encloses all the referred devices

Virtual simulation of the postsurgical cosmetic outcome in patients with pectus excavatum

Pectus excavatum is the most common congenital deformity of the anterior chest wall, in which several ribs and the sternum grow abnormally. Nowadays, the surgical correction is carried out in children and adults through Nuss technic. This technic has been shown to be safe with major drivers as cosmesis and the prevention of psychological problems and social stress. Nowadays, no application is known to predict the cosmetic outcome of the pectus excavatum surgical correction. Such tool could be used to help the surgeon and the patient in the moment of deciding the need for surgery correction. This work is a first step to predict postsurgical outcome in pectus excavatum surgery correction. Facing this goal, it was firstly determined a point cloud of the skin surface along the thoracic wall using Computed Tomography (before surgical correction) and the Polhemus FastSCAN (after the surgical correction). Then, a surface mesh was reconstructed from the two point clouds using a Radial Basis Function algorithm for further affine registration between the meshes. After registration, one studied the surgical correction influence area (SCIA) of the thoracic wall. This SCIA was used to train, test and validate artificial neural networks in order to predict the surgical outcome of pectus excavatum correction and to determine the degree of convergence of SCIA in different patients. Often, ANN did not converge to a satisfactory solution (each patient had its own deformity characteristics), thus invalidating the creation of a mathematical model capable of estimating, with satisfactory results, the postsurgical outcome.Fundação para a Ciência e a Tecnologia, Portugal (FCT) through the Postdoc grant referenced SFRH/BPD/46851/2008 and R&D project referenced PTDC/SAU-BEB/103368/2008

Pectus Excavatum postsurgical outcome based on preoperative soft body dynamics simulation

Pectus excavatum is the most common congenital deformity of the anterior chest wall, in which an abnormal formation of the rib cage gives the chest a caved-in or sunken appearance. Today, the surgical correction of this deformity is carried out in children and adults through Nuss technic, which consists in the placement of a prosthetic bar under the sternum and over the ribs. Alth ough this technique has been shown to be safe and reliable, not all patients have achieved adequate cosmetic outcome. This often leads to psyc hological problems and social stress, before and after the surgical correction. This paper targets this particular problem by presenting a method to predict the patient surgical outcome based on pre-surgical imagiologic information and chest skin dynamic modulation. The proposed approach uses the patient pre-surgical thoracic CT scan and anatomical-surg ical references to perform a 3D segmentation of the left ribs, right ribs, sternum and skin. The technique encompasses three steps: a) approximation of the cartilages, between the ribs and the sternum, trough b-spline interpolation; b) a volu metric mass spring model that connects two layers - inner skin layer based on the outer pleura contour and the outer su rface skin; and c) displacement of the sternum according to the prosthetic bar position. A dynamic model of the skin around the chest wall region was generated, capable of simulating the effect of the movement of the prosthetic bar along the sternum. The results were compared and validated with patient postsurgical skin surface acquired with Polhemus FastSCAN system.Fundação para a Ciência e Tecnologi

Thoracic wall reconstruction using ultrasound images to model/bend the thoracic prosthesis for correction of pectus excavatum

Pectus excavatum is the most common congenital deformity of the anterior thoracic wall. The surgical correction of such deformity, using Nuss procedure, consists in the placement of a personalized convex prosthesis into sub-sternal position to correct the deformity. The aim of this work is the CT-scan substitution by ultrasound imaging for the pre-operative diagnosis and pre-modeling of the prosthesis, in order to avoid patient radiation exposure. To accomplish this, ultrasound images are acquired along an axial plane, followed by a rigid registration method to obtain the spatial transformation between subsequent images. These images are overlapped to reconstruct an axial plane equivalent to a CT-slice. A phantom was used to conduct preliminary experiments and the achieved results were compared with the corresponding CT-data, showing that the proposed methodology can be capable to create a valid approximation of the anterior thoracic wall, which can be used to model/bend the prosthesis.Fundação para a Ciencia e Tecnologia (FCT

Variations of the soft tissue thicknesses external to the ribs in pectus excavatum patients

BACKGROUND: Surgical repair of pectus excavatum (PE) has become more popular due to improvements in the minimally invasive Nuss procedure. The pre-surgical assessment of PE patients requires Computerized Tomography (CT), as the malformation characteristics vary from patient to patient. OBJECTIVE: This work aims to characterize soft tissue thickness (STT) external to the ribs among PE patients. It also presents a comparative analysis between the anterior chest wall surface before and after surgical correction. METHODS: Through surrounding tissue segmentation in CT data, STT values were calculated at different lines along the thoracic wall, with a reference point in the intersection of coronal and median planes. The comparative analysis between the two 3D anterior chest surfaces sets a surgical correction influence area (SCIA) and a volume of interest (VOI) based on image processing algorithms, 3D surface algorithms, and registration methods. RESULTS: There are always variations between left and right side STTs (2.54 ± 2.05 mm and 2.95 ± 2.97 mm for female and male patients, respectively). STTs are dependent on age, sex, and body mass index of each patient. On female patients, breast tissue induces additional errors in bar manual conception. The distances starting at the deformity's largest depression point at the SCIA are similar in all directions. Some diverging measures and outliers were found, being difficult to find similar characteristics between them, especially in asymmetric patients. CONCLUSION: The Nuss procedure metal bar must be modeled according to each patient's special characteristics. The studied relationships between STT and chest surface could represent a step forward to eliminate the CT scan from PE pre-surgical evaluation.This work was supported by "Fundacao para a Ciencia e a Tecnologia" (FCT), Portugal, through the R&D project referenced PTDC/SAU-BEB/103368/2008 and the fellowships referenced SFRH/BD/74276/2010, SFRH/BD/68270/2010 and SFRH/BPD/46851/2008

Applications of yeast flocculation in biotechnological processes

A review on the main aspects associated with yeast flocculation and its application in biotechnological processes is presented. This subject is addressed following three main aspects – the basics of yeast flocculation, the development of “new” flocculating yeast strains and bioreactor development. In what concerns the basics of yeast flocculation, the state of the art on the most relevant aspects of mechanism, physiology and genetics of yeast flocculation is reported. The construction of flocculating yeast strains includes not only the recombinant constitutive flocculent brewer’s yeast, but also recombinant flocculent yeast for lactose metabolisation and ethanol production. Furthermore, recent work on the heterologous β-galactosidase production using a recombinant flocculent Saccharomyces cerevisiae is considered. As bioreactors using flocculating yeast cells have particular properties, mainly associated with a high solid phase hold-up, a section dedicated to its operation is presented. Aspects such as bioreactor productivity and culture stability as well as bioreactor hydrodynamics and mass transfer properties of flocculating cell cultures are considered. Finally, the paper concludes describing some of the applications of high cell density flocculation bioreactors and discussing potential new uses of these systems.Fundação para a Ciência e a Tecnologia (FCT) – PRAXIS XXI - BD11306/97

Evaluation of physical activity programmes for the elderly - exploring the lessons from other sectors and examining the general characteristics of the programmes

<p>Abstract</p> <p>Background</p> <p>In Portugal, there are several physical activity (PA) programmes for elderly people developed by the local government. The importance of these programmes has been increasing since the evidence has shown that this type of health promotion interventions may reduce the deleterious effects of the ageing process. However, no study has already identified the general characteristics of these programmes nor if they use any scheme to assess the quality of the service provided. A widely-used scheme is the EFQM Excellence Model, which will be in the core of our present work. Thus, the main aims of this preliminary study were 1) to identify the general characteristics of the PA programmes developed by the Portuguese Local Public Administration 2) to determine the extent of implementation of quality initiatives in these programmes.</p> <p>Methods</p> <p>Data were collected by an on-line questionnaire sent to all Continental Municipalities (n = 278). Categorical data were expressed as absolute counts and percentages. Continuous data were expressed as the mean and SD. An open-ended question was analysed using qualitative content analysis with QSR NVivo software. Associations between categorical variables were tested by the use of contingency tables and the calculation of chi-square tests. Significance level was set at p ≤ 0.05.</p> <p>Results</p> <p>Results showed: i) a total of 125 PA programmes were identified in the 18 districts of the Portugal mainland; ii) the main goal of the majority (95.2%) was the participants' health promotion; iii) different characteristics of the programmes were found according to different regions of the country; iv) certain characteristics of the programmes were associated to the existence of other features; v) only one PA programme developed quality initiatives.</p> <p>Conclusions</p> <p>In conclusion, although there are many PA programmes for elderly people spread throughout the country, aiming at improving the health of participants, the overwhelming majority does not adopt quality control initiatives. Considering that the quality of a service increases customer satisfaction, the continuous quality improvement of the PA programmes for elderly people should therefore be implemented since they can be useful and critical for elderly satisfaction and adherence.</p

Perspectives on utilization of edible coatings and nano-laminate coatings for extension of postharvest storage of fruits and vegetables

It is known that in developing countries, a large quantity of fruit and vegetable losses results at postharvest and processing stages due to poor or scarce storage technology and mishandling during harvest. The use of new and innovative technologies for reducing postharvest losses is a requirement that has not been fully covered. The use of edible coatings (mainly based on biopolymers) as a postharvest technique for agricultural commodities has offered biodegradable alternatives in order to solve problems (e.g., microbiological growth) during produce storage. However, biopolymer-based coatings can present some disadvantages such as: poor mechanical properties (e.g., lipids) or poor water vapor barrier properties (e.g., polysaccharides), thus requiring the development of new alternatives to solve these drawbacks. Recently, nanotechnology has emerged as a promising tool in the food processing industry, providing new insights about postharvest technologies on produce storage. Nanotechnological approaches can contribute through the design of functional packing materials with lower amounts of bioactive ingredients, better gas and mechanical properties and with reduced impact on the sensorial qualities of the fruits and vegetables. This work reviews some of the main factors involved in postharvest losses and new technologies for extension of postharvest storage of fruits and vegetables, focused on perspective uses of edible coatings and nano-laminate coatings.María L. Flores-López thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant Number: 215499/310847). Miguel A. Cerqueira (SFRH/BPD/72753/2010) is recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, POPH-QREN and FSE Portugal). The authors also thank the FCT Strategic Project of UID/ BIO/04469/2013 unit, the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and the project ‘‘BioInd Biotechnology and Bioengineering for improved Industrial and AgroFood processes,’’ REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico – FUNCAP, CE Brazil (CI10080-00055.01.00/13)

A História da Alimentação: balizas historiográficas

Os M. pretenderam traçar um quadro da História da Alimentação, não como um novo ramo epistemológico da disciplina, mas como um campo em desenvolvimento de práticas e atividades especializadas, incluindo pesquisa, formação, publicações, associações, encontros acadêmicos, etc. Um breve relato das condições em que tal campo se assentou faz-se preceder de um panorama dos estudos de alimentação e temas correia tos, em geral, segundo cinco abardagens Ia biológica, a econômica, a social, a cultural e a filosófica!, assim como da identificação das contribuições mais relevantes da Antropologia, Arqueologia, Sociologia e Geografia. A fim de comentar a multiforme e volumosa bibliografia histórica, foi ela organizada segundo critérios morfológicos. A seguir, alguns tópicos importantes mereceram tratamento à parte: a fome, o alimento e o domínio religioso, as descobertas européias e a difusão mundial de alimentos, gosto e gastronomia. O artigo se encerra com um rápido balanço crítico da historiografia brasileira sobre o tema